Registering The Remote Control Codes For Playback Devices - Yamaha aventage RX-A3070 Owner's Manual

Registering the remote control codes for
playback devices
SOURCE RECEIVER
SOURCE z
You can use the unit's remote control to operate playback devices if you
AV SOURCE
1 2 3 4
RECEIVER
have registered their remote control codes. You can also use the input
5 6 7 V-AUX V-AUX
selection keys to change the playback devices that are controlled by the
AUDIO
Input selection keys
1 2 3 4
remote control, because their remote control codes are assigned to the
PHONO PHONO BLUETOOTH BLUETOOTH USB USB NET NET
input selection keys.
TUNER TUNER
MAIN MAIN 2 3 4 2 3 4
PARTY PARTY HDMI OUT HDMI OUT
ZONE ZONE
SCENE SCENE
1 1 2 2 3 3 4 4
PROGRAM PROGRAM MUTE MUTE VOLUME VOLUME
External device
TOP MENU TOP MENU POP-UP/MENU POP-UP/MENU
operation keys
ON ON
OPTION OPTION
SCREEN SCREEN
Menu operation keys
ENTER ENTER
RETURN RETURN DISPLAY DISPLAY
BAND
MODE MODE
External device
TUNING PRESET
operation keys
SUR. DECODE STRAIGHT SUR. DECODE STRAIGHT
MOVIE MOVIE MUSIC MUSIC
ENHANCER PURE DIRECT ENHANCER PURE DIRECT
INFO INFO SLEEP SLEEP
1 2 3 4
Numeric keys
5 6 7 8
MEMORY
9 0 10 10 ENT
TV
TV operation keys
INPUT
TV VOL TV CH
MUTE CODE SET
CODE SET
Once the remote control code is registered successfully, SOURCE blinks
twice.
If it blinks six times, registration has failed. Repeat from Step 2.
X
For details on how to register a remote control code to a SCENE key, refer to
"Registering a scene" (p.77).
1
See "List of remote control codes" (p.198) to find the
remote control code for your playback device.
X
If there are multiple remote control codes, register the first code in the list. If
that does not work, try the other codes.
2
Press CODE SET.
SOURCE blinks twice.
Perform each of the following steps within 1 minute. Otherwise,
the setting will be canceled. If this happens, repeat from Step 2.
3
Press the input selection key.
For example, press AV 1 to set the remote control code for the
playback device connected to the AV 1 jack.
4
Use the numeric keys to enter the 4-digit remote control
code.
■ Playback device operations
Once you have registered the remote control code for your playback
device, you can control it using the following keys after selecting the
input source or scene.
X
By pressing SOURCE or RECEIVER, you can switch the devices (the unit or external
device) that are operated by the menu operation keys, DISPLAY and numeric keys. You
can operate the unit after pressing RECEIVER (lights up in orange), and an external
device after pressing SOURCE (lights up in green). For example, if you register the
remote control code of your external device on TUNER, you can operate the unit's
built-in FM/AM radio after pressing RECEIVER and the external device after pressing
SOURCE.
SOURCE z
Menu operation
keys
DISPLAY
External device
operation keys
Numeric keys
TV operation keys
Y
These keys work only if the corresponding function is available on your playback device
and if the device can be operated with an infrared remote control.
169
En
Turns on/off the playback device.
Cursor keys Select an item.
ENTER Confirms a selected item.
RETURN Returns to the previous screen.
Switches information on the display.
TOP MENU Displays the top menu.
POP-UP/MENU Displays the pop-up menu.
s
Stops playback.
d
Stops playback temporarily.
Starts playback of the selected
a
song/video.
h
Searches forward/backward (by
holding down).
j
f
Skips forward/backward.
g
Enter numerical values.
Control the TV (p.168).