Table of Contents
Advertisement
setup or automatically exit menu mode without any change after one minute. To go back to the last
function without any change press the MENU button.
Optically Linear
Optically Linear: The increase in light intensity appears to be linear as DMX value is increased.
Square Law: Light intensity control is finer at low levels and coarser at high levels. Inverse Square
Law: Light intensity control is coarser at low levels and finger at high levels.
S-cure: Light intensity control is finger at low levels and high levels and coarser at medium levels.
Sound Mode
Press the MENU button up to when
DOWN and UP button to select the
press ENTER button to setup or automatically exit menu mode without any change after one
minute. To go back to the functions without any change press the MENU button
Sound Sense
Press the MENU button up to when
the display will blink. Use DOWN and UP button to adjust sensitivity of the sound control from 0 to
100. Once selected, press ENTER button to setup or automatically exit menu mode without any
change after one minute. Back to the previous functions without any change press MENU button.
Blackout mode
Press the MENU button up to when
DOWN and UP button to select the
ENTER button to setup or automatically exit menu mode without any change after one minute. To
go back to the functions without any change press the MENU button
LED
Press the MENU button up to when
Square Law
is shown on the display. Pressing ENTER button, Use
(sound on) or
is shown on the display. Pressing ENTER button and
is shown on the display. Pressing ENTER button, Use
(blackout) or
is shown on the display. Pressing ENTER button and
8A
Inverse Square Law
(sound off). Once select,
(normal). Once select, press
S-curve
Advertisement
Table of Contents
