Trigger Input/Output; Rs-232 Control Port - ELECTROCOMPANIET ECI 6 Owner's Manual

ENG
12V trigger Input/Output
The 12V trigger output may be used to automatically power up a
CD-player (or other equipment with 12V trigger input) when ECI 6 is
powered up. When ECI 6 powers up the 12V trigger output will be set
to 12V and will support up to 75 mA current output. Please keep the cur-
rent draw below 75 mA by limiting the number of devices connected to
the 12V trigger output.
The ECI 6 will power up (leave standby) when a voltage in range 8-20V
(AC or DC) is present on the 12V trigger input, and stays powered on
for as long as the voltage is present. The current draw at the 12V trigger
input is 3.3mA.

RS-232 Control Port

The RS-232 control port may be used in home installation setups or general
usage for controlling basic functionality on the ECI 6. Please refer
to document "ECI6DS RS232 Command Reference V1.pdf" for further infor-
mation. This document may be downloaded from www.electrocompaniet.no
5