Remote Control; Using The Remote; Replacing Batteries - ELECTROCOMPANIET ECI 6 Owner's Manual

Remote control

1
2
TOS
COAX1
Link 1
TOS
COAX2
Link 2
USB
3
MENU
TOP MENU SETUP
4
5
AMP
6
7
8
9
S.MODE
13
1. Mute - on/off.
Standby mode - hold mute1-2 sec. to set
the ECI 6 into a standby mode.
2. CD - switch to CD input
3. AUX - switch to AUX input.
4. Standby - not in use with the amplifiers.
Work as Standby with a players.
5. Dim - dimming the amplifiers display.
6. DVD - switch to DVD input
7. Volume up - increase the volume.
8. Volume down - decrease the volume.
9. HT - switch to a Home theater input.

Replacing batteries

Use 2pcs AAA or LR03 batteries.
Observe correct polarization when
inserting batteries. Please remove
batteries when the remote is not used
for a prolonged period of time.

Using the remote

When using the remote control, the
front end of the remote control should
be pointed to the front panel of your
ECI 6. A free line of sight is required
between the remote and the infrared
sensor on the front pane
ENG