ELECTROCOMPANIET ECI 6 Owner's Manual page 3

Unpacking the ECI 6
Immediately upon receipt of the ECI 6, inspect the carton for possible damage
during shipment. The carton and packaging have been designed to provide the
safest possible protection for transport of your integrated amplifier. Unpack the
unit carefully. Save all packaging materials for future shipment.
The contents of the carton
• 1 pc. Electrocompaniet ECI 6 Integrated amplifier.
• 1 pc. AC main cord.
• 1 pc. Spare main fuse (located in the fuse drawer,
• 1 pc. Inspection card.
• 1 pc. Owner's manual.
• 1 pc. IR Remote control
• 2 pcs. AAA/LR03 Batteries
Set up procedure
Before connecting the ECI 6 to the AC Power outlet, check that the main voltage
indicated on the rear panel corresponds to the line voltage in the country were
you intend to use the unit.
How to avoid damages
Do not under any circumstances connect or disconnect equipment when power
is turned on. The design of the RCA plug generates a huge transient when
inserted. Connecting or disconnecting equipment with the power on can result in
severe damage to both speakers and amplifier.
How to avoid noise problems
The ECI 6 contains delicate circuits that are sensitive to magnetic stray fields. The
unit should not be placed near power voltage transformers, TV sets etc. Care
should also be taken regarding placement of the interconnect cables. Do not run
interconnect cables in parallel with main cords or speaker cables. Keep intercon-
nect cables as short as possible.
How to avoid possible antenna problems
In some set-ups hum may occur when you connect the radio, VCR or TV to your
system. The problem is caused by DC voltage coming from your antenna. Please
contact your cable network operator.
3.15AT /250VAC or 5AT/115VAC)
3
ENG