Error Codes - ELECTROCOMPANIET ECI 6 Owner's Manual

Error codes

If the ECI 6 is not working properly, the display will show an error code.
The error codes are:
Display Error
text
DC FAULT LEFT DC voltage left channel
DC FAULT DC voltage right channel
RIGHT
DC DC left + right channels
OVERLOAD Overload of left
FAULT channel
LEFT
OVERLOAD Overload right channel
FAULT
RIGHT
OVRLOAD Overload left+right
channels
TEMPERATURE Over temperature
left+right channel
For troubleshooting please contact your local dealer or our support department.
All contact information you will find at www.electrocompaniet.no/support
Description
Make sure that the + and – leads
of the loudspeaker cables are
not shorted, and that the speaker
cables are not in contact with the
chassis of ECI 6.
The amplifier is overheated. This is
caused by either playing to loud
for a long period of time, or not
enough free space on the sides or
above the ECI 6.
Turn down the volume and make
sure there is enough free space
around the amplifier.
7
What to do
Please contact service center.
ENG