Advertisement
Quick Links
Advertisement
Related Manuals for ELECTROCOMPANIET EC 4.8
Summary of Contents for ELECTROCOMPANIET EC 4.8
- Page 1 EC 4.8...
- Page 2 2 pcs batteries Set up procedure Before connecting the EC 4.8 to the mains, check that the main voltage indicated on the rear panel corresponds to the line voltage in the territory where you intend to use the unit. How to avoid damages Do not under any circumstances connect or disconnect equipment when power is turned on.
- Page 3 There are two sets of balanced inputs labelled SACD/DVD and CD. Connect the right channel input to the inputs on the right side of the EC 4.8 and the left channel inputs on the left side of the EC 4.8.
- Page 4 In daily operation, switch off the EC 4.8 by turning the volume control down. When the EC 4.8 is not to be used for a long period of time, use the main switch to turn the unit off. Then disconnect the AC main cord for maximum safety.
- Page 5 1 – 200 kHz 1 – 200 kHz Channel separation > 120 dB > 120 dB Power consumption (no load or signal) 30 W The EC 4.8 is DC coupled from input to output. Dimensions Width 483 mm Depth 368 mm...
-
Page 6: Important Notice
Important Notice For optimal sonic performance, the EC 4.8 should be burned in for a minimum time of 72 hours. If the EC 4.8 has been switched off, allow two hours of warm-up for optimal sonic performance. Proper ventilation is important. - Page 7 Illustration 1 – Back panel...