Kyocera ECOSYS M6030cdn Operation Manual page 25

Troubleshooting > Troubleshooting
S
Message
Scanner memory is full.
Job is canceled.
*1
Send Error.
Shake the toner
container. [C][M][Y][K]
SSD error. Job is
canceled.
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. For details
on Auto Error Clear, refer to the following:
Auto Err. Clear (page 8-18)
T
Message
The slit glass requires
cleaning.
The toner container is
not locked or improperly
installed.
This user account is
locked out.
Contact administrator
Job is canceled.
Toner is low.
[C][M][Y][K]
(Replace when empty.)
Checkpoints
—
—
—
—
Checkpoints
—
—
—
—
10-24
Corrective Actions
Scanning cannot be performed any
more due to insufficient memory.
The job is canceled. Select [OK].
An error has occurred during
transmission. The job is canceled.
Select [OK].
Refer to Responding to Send Error
for the error code and corrective
actions.
Shake the toner container well and
reinstall it.
An error has occurred on SSD. Job
is canceled. Select [OK].
The possible error codes and their
descriptions are as follows.
01: The amount of data that can be
saved at once has been exceeded.
Turn the power OFF/ON. If the error
still occurs, divide the file into
smaller files. If the error occurs after
the file is divided, the specified file
may be damaged. Delete the file.
04: Insufficient space on SSD to
complete this operation. Move data
or delete unneeded data.
Corrective Actions
Clean the slit glass using the
cleaning cloth supplied with the
document processor.
The toner container is not installed
correctly. Set it correctly.
Contact administrator.
The job is canceled. Select [OK].
It is almost time to replace the toner
container. Obtain a new toner
container.
Reference
Page
—
page 10-26
page 10-4
—
Reference
Page
page 10-2
page 10-4
—
—