Kyocera ECOSYS M6030cdn Operation Manual page 24

Troubleshooting > Troubleshooting
R
Message
RAM disk error. Press
[OK].
Removable Memory is
full. Job is canceled.
Remove original from
document processor.
Replace all originals and
press Start key.
Replace MK.
Replace the toner.
Restricted by Job
Accounting.
Cannot print.
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. For details
on Auto Error Clear, refer to the following:
Auto Err. Clear (page 8-18)
Checkpoints
―
―
*1
Are there any originals left in the
document processor?
―
—
―
—
Corrective Actions
An error has occurred on the RAM
disk. Job is canceled. Select [OK].
The possible error codes and their
descriptions are as follows.
04: Insufficient space on the RAM
disk. If the optional RAM dis is
installed, increase the RAM Disk
Size by changing RAM Disk Mode
in System Menu.
NOTE
The range of RAM disk size can be
increased by selecting [Printer
Priority] in Optional Memory.
Job is canceled. Select [OK].
Insufficient free space in the
removable memory. Delete
unneeded files.
Remove originals from the
document processor.
Remove originals from the
document processor, put them back
in their original order, and place
them again. Press the [Start] key to
resume printing. Select [Cancel] to
cancel the job.
Replacement of the parts in the
maintenance kit is necessary at
every 200,000 pages (ECOSYS
M6030cdn/ECOSYS M6530cdn) of
printing and requires professional
servicing. Contact your Service
Representative.
Replace the toner container to our
specified toner container.
This job is canceled because it is
restricted by Job Accounting. Select
[OK].
10-23
Reference
Page
page 8-19
―
―
―
—
page 10-4
—