Kyocera ECOSYS M6030cdn Operation Manual page 21

Troubleshooting > Troubleshooting
J
Message
Job Accounting
restriction exceeded.
Job is canceled.
K
Message
KPDL error. Job is
*1
canceled.
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. For details
on Auto Error Clear, refer to the following:
Auto Err. Clear (page 8-18)
L
Message
Load paper in cassette #.
↑↓ (Displayed alternately)
Press OK to continue
using cassette #.
Load paper in cassette #.
↑↓ (Displayed alternately)
Set selected size paper
and press [OK].
Load paper in MP tray.
↑↓ (Displayed alternately)
Press OK to continue
using MP tray.
Load paper in MP tray.
↑↓ (Displayed alternately)
Set selected size paper
and press [OK].
Low temperature.
Adjust room temp.
Checkpoints
Is the acceptable printing count
restricted by Job Accounting
exceeded?
Checkpoints
―
Checkpoints
Is the indicated cassette out of
paper?
Is the indicated cassette out of
paper?
Is the paper of the selected size
loaded in the multi purpose tray?
Is the paper of the selected size
loaded in the multi purpose tray?
—
10-20
Corrective Actions
The printing count exceeded the
acceptable count restricted by Job
Accounting. Cannot print any more.
This job is canceled. Select [OK].
Corrective Actions
PostScript error has occurred. The
job is canceled. Select [OK].
Corrective Actions
Load paper.
Select [Paper] to select the other
paper source. Select the [OK] key
to print on the paper in the currently
selected paper source.
Load paper.
Select [Paper] to select the other
paper source.
Load paper.
Select [Paper] to select the other
paper source. Select the [OK] key
to print on the paper in the currently
selected paper source.
Load paper.
Select [Paper] to select the other
paper source.
Adjust the temperature and the
humidity of your room.
Reference
Page
―
Reference
Page
―
Reference
Page
page 3-4
page 3-4
page 3-7
page 3-7
—