Kyocera ECOSYS M6030cdn Operation Manual page 22

Troubleshooting > Troubleshooting
M
Message
Machine failure. Call
service.
Maximum number of
scanned pages. Job is
canceled.
Memory is full. Job is
canceled.
Memory is full.
Print job cannot be
processed completely.
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. For details
on Auto Error Clear, refer to the following:
Auto Err. Clear (page 8-18)
N
Message
Non-genuine Toner.
Press [Help].
Checkpoints
―
Is the acceptable scanning count
exceeded?
—
—
*1
Checkpoints
Is the installed toner container our
own brand?
10-21
Corrective Actions
An error has occurred in the
machine. Make a note of the error
code displayed on the message
display, and contact your service
representative.
Cannot scan pages any more. Job is
canceled. Select [OK].
The process cannot be performed
due to insufficient memory. Select
[OK]. The job will be canceled.
Unable to continue the job as the
memory is used up. Select
[Continue] to print the scanned
pages. The print job cannot be
processed completely. Select
[Cancel] to cancel the job.
The machine may reproduce the
same originals by arranging the
following settings:
• Select [On] of RAM Disk Mode
in System Menu, and then
decrease the RAM Disk Size.
• Select [Printer Priority] of
Optional Memory in System
Menu.
NOTE
Before changing the RAM Disk
Setting or Optional Memory setting,
contact your administrator.
Corrective Actions
The manufacturer assumes no
responsibility for damage caused by
a non-genuine toner. We
recommend that you only use
genuine toner containers. When
you want to use the toner container
currently installed, select the [OK]
key and the [Stop] key
simultaneously for 3 seconds or
more.
Reference
Page
―
—
—
—
Reference
Page
—