Table of Contents
Advertisement
3 Components and Power Supply
Remove the flap's screws from the top panel
Fig. 9:
(4) Once the screws have been removed, slide the flap and lift it (making sure no grooves attach the flap to the top
panel) to remove it. Place it in a safe location.
Top panel without flap
Fig. 10:
(5) Find the place where the expansion board needs to be located. Look for the lateral connector of the card con-
nection and the card standoff posts to the chassis.
Location of the lateral connector for SLOT 1 expansion module
Fig. 11:
(6) Using a screwdriver, remove the cover over the expansion slot. This cover is located on the front panel. Please
see
Fig. 12
Remove the cover from SLOT 1
Fig. 12:
(7) Insert the expansion board and connect it. This operation must be carried out carefully, without forcing any
piece or part of the device.
(8) Screw in the board. Firmly tighten the screws without damaging the board.
(9) Reposition the expansion slot cover and screw it down. Please see
10
on page 10.
Fig. 13
on page 11.
Alcatel-Lucent Enterprise
OA58XX Router
Hide quick links:
Advertisement
Table of Contents
