Page 2
This publication is subject to change. Alcatel-Lucent offers no warranty whatsoever for information contained in this manual. Alcatel-Lucent is not liable for any direct, indirect, collateral, consequential or any other damage connected to the de- livery, supply or use of this manual.
1.7 Technical Support Alcatel-Lucent technical support is committed to resolving our customer’s technical issues in a timely manner. Cus- tomers with inquiries should contact us at: Contact information:...
1 About This Guide Alcatel-Lucent EMEA +800 00200100 (Toll Free) or +1(650)385-2193 Asia Pacific +65 6240 8484 Web: http://service.esd.alcatel-lucent.com Email: esd.support@alcatel-lucent.com 1.8 Related documentation ALU-Dm748-I Software Updating. Note The manufacturer reserves the right to make changes and improvements to either software or hard- ware of this product, modifying the specifications of this manual without prior notice.
Chapter 2 OA58XX-NW Routers The OA58XX-NW router family consists of the following devices: • OmniAccess 5840 OA5840 ESR modular chassis base model has 2 x GigE WAN, 8 x GigE LAN, 1x DSL slot, 1 x AIC slot. See part number suffix for power cord plug type.
3 Components and Power Supply Alcatel-Lucent Chapter 3 Components and Power Supply The following chapter provides detailed information on the chassis of the OA58XX-NW router family and its compon- ents. This information includes: • Components. • Expansion modules. • Information on assembly.
Page 9
3 Components and Power Supply Alcatel-Lucent Front panel LEDs table Description State Power-on indicator. It lights up when connected to the power. Shows the state of the device con- Off -> Device not connected, not de- nected to the USB connector.
3 Components and Power Supply Alcatel-Lucent 10 Mbps: Flashes once 100 Mbps: Flashes twice 1000 Mbps: Flashes three times Green Ethernet (link) connection established Off -> Link has not been detected Green -> Flashes depending on the activity. Switch Ethernet interface LEDs Fig.
3 Components and Power Supply Alcatel-Lucent optional, so your device may not have any antennas. Not supported. ON/OFF switch. Power cable connection. 3.1.3 Top Panel The following figure shows the top panel. Top panel Fig. 6: The top panel elements are as follows:...
3 Components and Power Supply Alcatel-Lucent 3.2 Expansion Slots The OA58XX-NW has three expansion slots (SLOT 1, SLOT 2 and SLOT 3) that allow you to expand features and interfaces by inserting different cards or boards. 3.2.1 SLOT 1 - Expansion Slot SLOT 1 is located on the right hand side of the device’s...
Page 13
3 Components and Power Supply Alcatel-Lucent nection and the card standoff posts to the chassis. Location of the lateral connector for SLOT 1 expansion module Fig. 11: (6) Using a screwdriver, remove the cover covering the expansion slot. This cover is located on the front panel.
Page 14
3 Components and Power Supply Alcatel-Lucent Current date: Mar 27 2013, Wednesday Current time: 12:56:57 System Info: PCB:0x128 GPPORCR:0x00280000 PVR:0x80212051 SVR:0x80EC0011 CLKs(KHz): CCB=393216 CPU0=786432 CPU1=786432 DDR(clk)=327680 LBUS=49152 Watchdog: Enabled MMU Mode: Dynamic ICache: ON; DCache: ON Write-Back; L2Cache: ON Mem Info:...
3 Components and Power Supply Alcatel-Lucent 3.2.2 SLOT 2 - Expansion Slot SLOT 2 is located on the left hand side of the device’s Rear Panel on page 6. In this case, we insert a AIC (Add-in card) into the SLOT.
Page 16
3 Components and Power Supply Alcatel-Lucent Inserting the AIC expansion card Fig. 18: (9) Screw the AIC board to the standoff posts using two screws and their corresponding washers. Firmly tighten the screws without damaging the board. Screwing down the AIC expansion card Fig.
Page 18
3 Components and Power Supply Alcatel-Lucent To correctly insert the card, please follow these steps: (1) Switch off the device and remove the cables, as described in section Disconnecting on page 17. (2) Remove the device from the workplace and place it in a stable, safe location where it can be easily accessed and handled.
Page 19
3 Components and Power Supply Alcatel-Lucent ************************************************** ************************************************** ************************************************** BIOS CODE DUMP....BIOS DATA DUMP..End of BIOS dump BIOS menu address: 0x4BD78 FLASH BIOS CODE VERSION: 02.01 6 2013 17:59:56 Current date: Mar 27 2013, Wednesday Current time: 12:56:57...
3 Components and Power Supply Alcatel-Lucent Running application at: 0x00200140 Flash configuration read Parsing text mode configuration ... Configuration parsed Initializing Press any key to get started 3.3 Installation in a rack The OA58XX-NW can be installed in a 19” rack. To do this, you need two plastic brackets like the ones shown be- low.
3 Components and Power Supply Alcatel-Lucent Workplace Conditions, Main Characteristics • Excessive cold and heat should be avoided, as should humidity and dust. • Direct exposure to sunlight should be avoided, as well as other heat sources. The device should not be placed amongst papers, magazines or other elements that could block natural air circulation.
3 Components and Power Supply Alcatel-Lucent 3.4.2 PoE Source The OA58XX-NW router can be powered through an Ethernet cable that complies with the PoE 802.3af standard (15.4 W per port). To use the PoE source option, you need to install a APC PoE card.
Page 23
3 Components and Power Supply Alcatel-Lucent ************************************************** ************************************************** ************************************************** BIOS CODE DUMP....BIOS DATA DUMP..End of BIOS dump BIOS menu address: 0x4BD78 FLASH BIOS CODE VERSION: 02.01 6 2013 17:59:56 Current date: Mar 27 2013, Wednesday Current time: 12:56:57...
3 Components and Power Supply Alcatel-Lucent Running application at: 0x00200140 Flash configuration read Parsing text mode configuration ... Configuration parsed Initializing Press any key to get started Once the APC PoE card has been installed, we can connect the PoE source to the device: Connecting the PoE source to the device: Schema Fig.
Page 25
3 Components and Power Supply Alcatel-Lucent When the device is switched on, a message similar to the one shown below will appear on the configuration con- sole: ************************************************** ************************************************** ************************************************** BIOS CODE DUMP....BIOS DATA DUMP..End of BIOS dump FLASH BIOS CODE VERSION: 02.01...
3 Components and Power Supply Alcatel-Lucent APP CODE DUMP........... APP DATA DUMP........... Running application at: 0x00200140 Flash configuration read Parsing text mode configuration ... Empty configuration used Initializing Press any key to get started • On reaching this point, put micro-switch ‘5’ in the OFF position (it’s not necessary to turn off the device). This way, the saved configuration will run the next time you restart the device.
3 Components and Power Supply Alcatel-Lucent 3.6.4 Connecting for Configuration The OA58XX-NW router has a RJ45female connector on the front panel known as “ Conf.” , which provides access to the device's local console. For further information, please see section Connecting to the device on page 27.
3 Components and Power Supply Alcatel-Lucent Location of the SATA connector and standoffs for the hard disk Fig. 37: (5) Screw the hard disk supplied to the auxiliary metal plate. (6) Connect the hard disk and place the metallic flange carefully over the standoff posts located in the device chassis.
Page 29
3 Components and Power Supply Alcatel-Lucent Location of the USB connector for the flash memory expansion Fig. 38: (5) Close the device with the cover. Secure the cover with the screws. (6) Connect and switch on the device, as described in section Connecting on page 17.
Technical Information Alcatel-Lucent Appendix A Technical Information A.1 Troubleshooting Below, you will find a table that will help you solve problems during the installation of the device. If you cannot solve the problem, please ask your distributor for additional information.
Technical Information Alcatel-Lucent A.3 Connecting to the device A.3.1 Connecting using the local console (Conf connector) The OA58XX-NW router has a RJ45 female connector on the front panel known as “ Conf .” , which provides access to the device local console.
Technical Information Alcatel-Lucent A.4.1 LAN (GE x) Connector RJ45 PIN FE Signals GE Signals RJ45 LAN BI-DA+ BI-DA+ BI-DA- BI-DA- BI-DB+ BI-DB+ BI-DC+ BI-DC- BI-DB- BI-DB- BI-DD+ BI-DD- Note The Ethernet connectors have a MDI-X and auto-polarity auto-detection feature that acts bidirectionally.
Technical Information Alcatel-Lucent A.5.4 Power Supply INPUT VOLTAGE 100-240 V AC INPUT CURRENT 1.8 A INPUT FREQUENCY 50/60 Hz MAXIMUM POWER 100 VA A.5.5 Dimensions and weight TYPE Box to assemble in a Rack 1U high LENGTH x WIDTH x HEIGHT 440 x 378,71 x 43.2 mm...
Regulatory compliance and safety information Alcatel-Lucent Appendix B Regulatory compliance and safety information B.1 Recycling and the Environment Please do not, under any circumstances, throw away any OA58XX-NW with normal domestic waste. Ask your local town hall for information on how to correctly dispose of them in order to protect the environment against e-waste. Al- ways respect the current laws regarding waste material.
Regulatory compliance and safety information Alcatel-Lucent B.3 Compliance B.3.1 FCC Statement B.3.1.1 Federal Communications Commission Interference This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a com- mercial environment.