Slot 3 - Expansion Slot - Alcatel-Lucent OmniAccess 5840 Installation Manual

Alcatel-Lucent Enterprise
Press any key to get started
3.2.3 SLOT 3 – Expansion Slot
SLOT 3 is located in the middle of the device's
xDSL expansion card module
Fig. 21:
SLOT 3 elements
Item
A
B
To correctly insert the card, please follow these steps:
(1) Switch off the device and remove the cables, as described in section
(2) Remove the device from the workplace and place it in a stable, safe location where it can be easily accessed
and handled.
(3) Remove the screws from the side panel in order to be able to dismantle the flap that gives access to the expan-
sion cards. Please see
(4) Once the screws have been removed, slide the flap and lift it (making sure no grooves attach the flap to the top
panel) to remove it. Place it in a safe location.
(5) Find the place where the xDSL expansion board needs to be located.
xDSL expansion board: Location
Fig. 22:
(6) Remove the lid that holds the back cover located on the rear panel.
Lid cover for xDSL
Fig. 23:
(7) Using a screwdriver, remove the cover over the expansion slot.
OA58XX Router
Rear Panel
Description
Screws to hold the cover of the expansion module in SLOT 3.
xDSL expansion module.
Fig. 9 on page 10.
on page 7. Insert an xDSL expansion board in this SLOT.
Disconnecting
3 Components and Power Supply
on page 19.
15