Installing The Sim - Alcatel-Lucent OA5725A Installation Manual

4 Installing the SIM card
SIM tray #2 for MD2 module (auxiliary)
Fig. 20:
In devices where a single WWAN module is installed (MD1) and when only one SIM card is going to be used, it can
be inserted into either of the two SIM trays (#1 or #2). However, you must remember that you will need to suitably
configure the router so it selects the appropriate tray.
• Module MD1 # SIM #1 (default) or SIM #2

4.2 Installing the SIM

In order to insert a SIM card in the internal tray, locate the retaining flange (metal fastening with OPEN and LOCK on
it) so you can open the tray and place the SIM card on it. The steps are as follows:
(1) Push the fastening in the direction indicated by the arrow with the Word OPEN.
(2) Open the upper part of the tray.
(3) Fully insert the SIM card using the guides.
(4) Return the tray to its original position.
(5) While pressing on the tray, push the fastening in the direction indicated by the word LOCK so it is firmly held in
place.
Instructions on how to insert the SIM in the internal tray
Fig. 21:
22
Alcatel-Lucent
OA5725A Router