Connectors; Lan Connector; Wwan Connectors; A.4 Connectors - Alcatel-Lucent OA5725A Installation Manual

Technical Information
• IP Address: 192.168.1.1
• IP Mask: 255.255.255.0
Note
Some devices leave the factory with a customized configuration for a specific client. This personaliza-
tion can mean that the default configuration may be different from the one shown above.
This initial configuration means you can access the device's configuration console through the Telnet IP protocol. To
do this, carry out the following steps:
• Configure the Ethernet interface on the IP terminal (normally a PC) using the IP address from the following range
[192.168.1.2, 192.168.1.254] and mask 255.255.255.0. E.g. 192.168.1.2, 255.255.255.0.
• Connect the IP terminal's Ethernet interface to any of the Ethernet Switch ports on the OA5725A router (the
LAN1...4 connectors) through an Ethernet cable (RJ45).
• Start a Telnet session from the IP terminal to IP address 192.168.1.1 (the OA5725A router's default address).
• The default configuration does not ask for login credentials (user/password) to access the console.
For further information on how to fully configure the device, please see the manuals included on the CD supplied with
the router.

A.4 Connectors

A.4.1 LAN Connector
RJ45 LAN
A.4.2 WWAN Connectors
26
RJ45 PIN
1
2
3
4
5
6
7
8
PIN
Internal
External
LAN
Tx+(input)
Tx- input)
Rx+(output)
--
--
Rx-(output)
--
--
ANT
RF in/out
GND
Alcatel-Lucent
OA5725A Router