Document Positioning; Scanning One Or A Set Of Documents - Contex SD One MF 44 User Manual

Scanning

Document Positioning

Position the document face up in the center of the
scanner
1. Load your document with the image side facing
upwards.
2. Align the center of the document with the
triangular arrow above the scanner feed tray.
3. Push the original into the insertion slot until you
feel it touch the rollers.
4. The scanner will take the original and
automatically move it into position ready to begin
scanning.
5. Load the paper, face up. Hold it with both hands and align the center of
the document with the mark on the center of the scanner.

Scanning one or a set of documents

Using the 'Set-Ready' scanning system
1. If you have several similar documents that all require the same scan
settings you can load them into the scanner one after the other without
needing to touch the green button.
2. Insert your next document before the counter reaches zero to keep the
scanner working in 'Set-Ready' mode.
3. Touch the green button when:

you get to end of the set

you only want one scan

you wish to change the scan settings
4. The scanner will return to the top menu if:

you touch the green button early

you wait for the countdown to reach zero
26