Installation Wizard - Contex SD One MF 44 User Manual

Scanner setup

Installation Wizard

Scanner installation
12
The Installation Wizard starts
The SD One MF Welcome screen signals that the scanner installation
process has begun.
The following screens contain the various installation steps required to set
up the scanner. Follow the screens shown in [path] below to return to this
area after the wizard has completed.
Press the Next button >> to proceed.
Use the Back << button to go back a step (where displayed).
Scanner installation
13
LAN network settings (DHCP)
By default the scanner will automatically try to obtain an IP address using
DHCP if cable connected to a local area network (LAN). Connecting via wifi
is not possible when the scanner is connected to a working LAN.
[settings > system > network]
14