Connecting Power To The Scanner - Contex SD One MF 44 User Manual

Scanner setup

Connecting power to the scanner

Connect power cable
7
Connecting the power cord to the scanner
Connect the power cord to the scanner power connection socket.
With the flat side of the cord facing upwards gently push the plug into the socket
on the rear of the scanner. Take care not to force the plug into the socket.
Connect power cable
8
Connecting the power cord to the electricity outlet
Connect the power plug end of the scanner power cord to a suitable power outlet.
CAUTION: The scanner is equipped with a three-wire (pin) earth grounded plug. If you are
unable to use the plug with your outlet contact a qualified electrician to replace the plug or outlet
to ensure a grounded power connection. For your own electrical safety do not try to defeat or
ignore the purpose of the grounding-type plug.
11