Contex SD One MF 44 User Manual page 20

Scanner setup
Scanner Installation
19b
Create printer media profiles
Step 1
On the Printer screen (previous page) press Media Profiles then select the
current media type loaded in the printer (Plain Paper in this example).
Step 2
Now press the Print button to print the color calibration page. It is important
that the printer is working properly for this operation.
Step 3
Load the printed color calibration page into the scanner taking care to align the
black arrow with the scanner center load point. Now press the Scan button to
scan the printed color calibration page.
Step 4
Press OK when you see the Media Profile Created message.
Make a new profile for each different type of paper used in the printer you wish
to copy to.
NOTE: If the scanner reports that it cannot find the calibration page reload it
and press the Scan button again to repeat the process.
20