Get Access Through Ssh/Ethernet - Avionic Design Meerkat K1 Eval Kit User Manual

4.3.2 Get access through SSH/Ethernet

1. Make sure that you connected the Eval Kit with the Ethernet cable to your local Ethernet network (see 
Chapter 4.2).
2. To connect to the Eval Kit via SSH, you need to determine the IP address of the system.

2.1 Read the instructions in Chapter 4.3.1 to get access to the Linux shell of the Eval Kit.
2.2 Write the command ifconfig into the Linux shell
 You will receive the IP address of the Eval Kit.
Note
The actual IP address depends on the settings of the DHCP server.
2.3 To connect to the Eval Kit via SSH using the IP address, write the command:
$ ssh root@<ip address>
30
/First steps