I
NSTALLATION
Power Up without the Multiport Cable
Power Up
without the
Multiport Cable
NOTE
22
M
X
800 S
I
ERIES
NSTALLATION
This section describes connecting the M
when no multiport cable is required.
If connected to an ECR using a USB cable, the M
power from the ECR.
Use the following guidelines when M
1
Make all the cable connections before connecting the power cable.
2
Insert the modular power connector either into the USB or 10Base-T port,
whichever is available.
3
Plug the power pack into an indoor electrical wall outlet.
G
UIDE
x
800 Series terminal to a power source
x
800 Series terminal gets
x
800 Series terminal is connected to power: