VeriFone Mx800 Series Installation Manual page 14

I
NSTALLATION
Installing the Device
WARNING
WARNING
14
M X 800 S I
ERIES NSTALLATION
Follow these steps to unpack the carton:
1
With the shipping carton right side up, open the top and remove all items from
the carton:
•
Cable tie-down strap and screw
•
Stylus, tether, and mounting holster
2
Remove the protective plastic wrap from the display or other components.
3
Place the components on a table or countertop.
4
Save the shipping carton and packing material for repacking or moving in the
future.
Selecting a Location
1
Select a location for the M
and merchant that offers adequate ventilation and protection.
x
The M 800 Series terminal is designed for indoor use only.
x
2
Place the M 800 Series terminal on a flat surface, such as a table or
countertop or mount on a mounting stand supplied by VeriFone. Avoid areas
with:
•
Excessive heat or dust
•
Oil or moisture
•
Devices that cause excessive voltage fluctuations or electrical noise, such
as air conditioners, fans, electric motors, neon signs, or high-frequency
security devices.
•
Direct sunlight or objects that radiate heat
3
Locate the peripheral conveniently in relation to power and ECR or LAN
connections. The power pack cable is approximately 1.8 meters (6 feet) long.
Do not use this product near water, including a bathtub, wash bowl, kitchen sink,
or laundry tub. Do not use in a wet basement or near a swimming pool.
4
Before connecting the terminal to the power supply, complete the installation
by connecting all the cables (see
the Multiport Cable).
G
UIDE
x
800 Series series terminal convenient for the user
Connecting the Device and Power Up with