Table of Contents
Advertisement
Installing and removing a hard disk
Although the Altos G310 Mk2 has four hard disk slots, the system
board only supports a maximum of three.
To remove a hard disk
Follow these steps to replace your computer's hard disk:
1
Remove the side and front panels (see page 32 and page 33).
2
Detach the cables from the exposed end of the HDD (1) and (2).
3
Squeeze the two locking tabs that secure the drive to the chassis
slot and gently remove the HDD from the system (3).
3
To install a hard disk
Observe the pre-installation and ESD precautions on page 29. Follow
these steps to replace your computer's hard disk:
1
47
Advertisement
Table of Contents
Troubleshooting
