Page 1
ASSEMBLY INSTRUCTION MODEL RTA-B003 IMPORTANT:Surfaces must be cleaned with a smooth soap and water solution , then cleared with a dry towel.Do not use solvents over surfaces or structural tubes. Thanks for purchasing one of our products. Please read carefully the assembly instructions before the installation.
Page 2
Main Panel Small Panel Top Frame Bottom Frame Main panel support Small panel support Middle frame Tilt plate Bottom frame cover Locking Caster Non-Locking caster Height Adjustment knob Screw Cover M6X35 M6X30 M6X23 M6X10 X4 M6 Allen Key Wrench Long Leg First take the middle frame #5 and assemble it to part #4 using screws "G"...
Page 3
Take both metal parts #8 and place them Take the tilt plate#6 and insert it into round tube on the other side of the top frame #3 and of part#3 and affix it with part “E”. affix them with “F” and “J”. With the main panel #1 upside-down, place the completed top frame on it, making the holes on the tilt plate coincide with the set of holes in...
Page 4
Desks Warranty LIMITED 5 YEAR WARRANTY RTA Products, LLC warrants to the Original Purchaser that this product will be free from defects in its workmanship and materials, under normal use and service conditions, as described herein. “Defects” as used in this warranty, is defined as any imperfections which impair the use of the furniture or product.
Need help?
Do you have a question about the RTA-B003 and is the answer not in the manual?
Questions and answers