Operation; Before Switching On The Machine; Switching On The Machine And Preparing It For Operation; Washing - Winterhalter PT-M Operating Instructions Manual

7

Operation

7.1 Before switching on the machine

Possible risk of damage due to suction of items from within the machine e.g. pieces of
cutlery
The pump inlet filter protects the circulating pump and the drain pump. Operate the machine
Caution
only with the pump inlet filter fitted.

7.2 Switching on the machine and preparing it for operation

7.3 Washing

Possible risk of scalding from hot wash water
 Keep children away from the dishwasher. The wash water is at a temperature of approx.
62 °C.
Warning
 Do not open the hood while the machine is washing. There is a risk of the hot wash water
spilling out. Stop the washing programme before doing so (
Possible risk of injury
 Do not place any objects on the hood.
 Arrange sharp, pointed utensils so that they do not cause injury.
Possible failure of the washing programme due to heavy dirt ingress
Pre-rinse all dishes and pans with cold water. Remove food residues.
Caution
 Open the water stop cock.
 Switch on the local mains disconnector.
 For your own safety, test the on-site residual-current circuit
breaker (FI).
 Open the hood.
 Remove the filter cylinder (1).
 Check whether the pump inlet filter (2) is fitted. If it is not
fitted there will be an error message when the machine is
switched on.
 Insert the filter cylinder (1).
 Check whether the rotating wash fields (top and bottom)
are fitted and properly engaged.
 Close the hood.
 Check whether sufficient detergent and rinse aid are pre-
sent in the storage containers. Replace the storage con-
tainers in time so that the cleaning results are not affected.
Operation
‎
7 .3.7).
11