Verifying The Operation Of The Appliance And Configuring Ipmi; Hardware Verification And Turning On The Netbackup 5230 Appliance And Storage Shelf - Symantec NetBackup 5230 Installation Manual

Hide thumbs Also See for NetBackup 5230:

Table of Contents

Verifying the operation of

the appliance and

configuring IPMI

This chapter includes the following topics:

Hardware verification and turning on the NetBackup

5230 appliance and storage shelf

Note: Do not attach external devices, such as tape drives or SAN clients, to the

appliance until this process has been completed.

Warning: Confirm that all power to the devices is turned off to prevent personnel

injuries and to prevent damage to the devices.

Verify that the devices and cables are installed correctly. The following table

provides instructions for checking the device installation.

Hardware verification and turning on the NetBackup 5230 appliance and

storage shelf

Turning on the storage shelves

Turning on the appliance

Configuring the IPMI from the NetBackup Appliance Shell Menu

Accessing and using the Symantec Remote Management interface

Chapter

Table of Contents

Need help?

Do you have a question about the NetBackup 5230 and is the answer not in the manual?