Installing And Connecting An Additional Symantec Storage Shelf To An Operational Netbackup 52Xx Appliance - Symantec NetBackup 5230 Installation Manual

Hide thumbs Also See for NetBackup 5230:

Table of Contents

Adding storage shelves

Installing and connecting an additional Symantec Storage Shelf to an operational NetBackup 52xx appliance

Installing and connecting an additional Symantec

Storage Shelf to an operational NetBackup 52xx

appliance

See Installing and connecting an additional Symantec Storage Shelf to an

operational NetBackup 52xx appliance" on page 52.

Adding the new disk storage space to the system

This task makes the disk storage space of the new units available for use.

See Adding the disk space of additional Symantec Storage Shelf units to an

operational NetBackup 52xx appliance from the NetBackup Appliance Web

Console" on page 54.

See Adding the disk space of additional Symantec Storage Shelf units to an

operational NetBackup 52xx appliance from the NetBackup Appliance Shell

Menu" on page 56.

Note: When you add an additional Symantec Storage Shelf to an operational

appliance, Symantec recommends that you schedule this task during low system

activity.

Use the following procedure to install and connect an additional Symantec Storage

Shelf to an operational NetBackup 52xx appliance.

Note: When you add a storage shelf to an operational system, it is not necessary

to shut down the appliance server or any existing storage shelves.

To install and connect an additional Symantec Storage Shelf to an operational

NetBackup 52xx appliance

Install the new storage shelf units in the rack.

Locate the SAS cables that are shipped with each storage shelf and connect

them as described in the following diagram and text descriptions:

Table of Contents

Do you have a question about the NetBackup 5230 and is the answer not in the manual?