SixThreeZero AROUND THE BLOCK Assembly Manual page 38

0 3
Turn the barrel adjuster located on the rear derailleur
clockwise until it stops.
B A R R E L
A D J U S T E R
H AV I N G T R O U B L E ? WA N T L I V E H E L P ? C A L L 3 1 0 . 9 8 2 . 2 8 7 7 O R E M A I L T E A M @ S I X T H R E E Z E R O . C O M .
0 4
P H I L L I P S
S C R E W D R I V E R
If the chain still hasn't reached the smallest cog, then you
will need to adjust the "High Gear" limiting screw located
on the derailleur (indicated by the letter H).
With a Phillips screwdriver, gradually turn the screw
counterclockwise 1/4 turn at a time while rotating the
pedal until the chain falls onto the smallest cog.
N O T E
The "High Gear" limiting screws are very sensitive. We recommend using only
1/4 turn at a time, in case you have to revert back to it's original position.