Using The Cli To View Neighbor Statistics For A Mesh Access Point - Cisco aironet 1522 Design And Deployment Manual

Figure 81
b.

Using the CLI to View Neighbor Statistics for a Mesh Access Point

Use these commands to view neighbor statistics for a specific mesh access point using the controller CLI.
•
•
•
Cisco Aironet 1520, 1130, 1240 Series Wireless Mesh Access Points, Design and Deployment Guide, Release 6.0
OL-20213-01
All APs > Access Point Name > Mesh Neighbor Stats Window
Click Back to return to the All APs > Access Point Name > Neighbor Info window.
To view the mesh neighbors for a specific mesh access point, enter this command:
show mesh neigh {detail | summary} AP_Name
Information similar to the following appears when you request a summary display:
AP Name/Radio Mac Channel Snr-Up Snr-Down Link-Snr Flags State
----------------- ------- ------ -------- -------- ------ -------
mesh-45-rap1 165
00:0B:85:80:ED:D0 149
00:17:94:FE:C3:5F 149
To view the channel and signal-to-noise ratio (SNR) details for a link between a mesh access point
and its neighbor, enter this command:
show mesh path AP_Name
Information similar to the following appears:
AP Name/Radio Mac Channel Snr-Up Snr-Down Link-Snr Flags State
----------------- ------- ------ -------- -------- ------ -------
mesh-45-rap1 165
mesh-45-rap1 is a Root AP.
To view the percentage of packet errors for packets transmitted by the neighbor mesh access point,
enter this command:
show mesh per-stats AP_Name
Information similar to the following appears:
Neighbor MAC Address 00:0B:85:5F:FA:F0
Total Packets transmitted: 104833
Total Packets transmitted successfully: 104833
Total Packets retried for transmission: 33028
Neighbor MAC Address 00:0B:85:80:ED:D0
Total Packets transmitted: 0
Total Packets transmitted successfully: 0
Total Packets retried for transmission: 0
15 18 16
5 6 5
7 0 0 0x860
15 18 16
Checking the Health of the Network
0x86b UPDATED NEIGH PARENT BEACON
0x1a60 NEED UPDATE BEACON DEFAULT
BEACON
0x86b UPDATED NEIGH PARENT BEACON
133