Adding A Building To A Campus Map - Cisco aironet 1522 Design And Deployment Manual

Click Save.
Step 6

Adding a Building to a Campus Map

You can add buildings to the Cisco WCS database regardless of whether you have added campus maps
to the database. This section explains how to add a building to a campus map or a standalone building
(one that is not part of a campus) to the Cisco WCS database.
To add a building to a campus map in the Cisco WCS database, follow these steps.
Click Monitor > Maps to display the Maps window.
Step 1
Click the desired campus. Cisco WCS displays the Maps > Campus Name window.
Step 2
From the Select a command drop-down menu, choose New Building and click GO.
Step 3
On the Campus Name > New Building window, follow these steps to create a virtual building in which
Step 4
to organize related floor plan maps:
a.
b.
c.
d.
Tip
e.
f.
g.
Click Save.
Step 5
Cisco Aironet 1520, 1130, 1240 Series Wireless Mesh Access Points, Design and Deployment Guide, Release 6.0
OL-20213-01
A hyperlink associated with the outdoor area takes you to the corresponding Map window
Note
Enter the building name.
Enter the building contact name.
Enter the number of floors and basements.
Enter an approximate building horizontal span and vertical span (width and depth on the map) in
feet.
The horizontal and vertical span should be larger than or the same size as any floors that you
might add later.You can also use Ctrl-click to resize the bounding area in the upper left corner
of the campus map. As you change the size of the bounding area, the Horizontal Span and
Vertical Span parameters of the building change to match your actions.
Click Place to put the building on the campus map. Cisco WCS creates a building rectangle scaled
to the size of the campus map.
Click on the building rectangle and drag it to the desired position on the campus map.
Note After adding a new building, you can move it from one campus to another without having to
recreate it.
Click Save to save this building and its campus location to the database. Cisco WCS saves the
building name in the building rectangle on the campus map.
A hyperlink associated with the building takes you to the corresponding Map window.
Note
Adding and Managing Mesh Access Points with Cisco WCS
153