Viewing Mesh Statistics For A Mesh Access Point; Using The Gui To View Mesh Statistics For A Mesh Access Point - Cisco aironet 1522 Design And Deployment Manual

Viewing Mesh Statistics for a Mesh Access Point

This section explains how to use the controller GUI or CLI to view mesh statistics for specific mesh access
points.
Note You can modify the Statistics Timer interval setting on the All APs > Details window of the controller
GUI.

Using the GUI to View Mesh Statistics for a Mesh Access Point

To view mesh statistics for a specific mesh access point using the controller GUI, follow these steps.
Click Wireless > Access Points > All APs to open the All APs window. (See
Step 1
Figure 74
To view statistics for a specific mesh access point, hover your cursor over the blue drop-down arrow for
Step 2
the desired mesh access point and choose Statistics. The All APs > AP Name > Statistics window for
the selected mesh access point appears. (See
Cisco Aironet 1520, 1130, 1240 Series Wireless Mesh Access Points, Design and Deployment Guide, Release 6.0
OL-20213-01
--------------------------
Association Failures 0
Association Timeouts 0
Association Successes 0
Authentication Failures 0
Authentication Timeouts 0
Authentication Successes 0
Re-Association Failures 0
Re-Association Timeouts 0
Re-Association Successes 0
Re-Authentication Failures 0
Re-Authentication Timeouts 0
Re-Authentication Successes 0
All APs Window
Figure 75.)
Checking the Health of the Network
Figure 74.)
125