Cisco aironet 1522 Design And Deployment Manual page 87

4. Model c3205 is a Cisco 3200 with a 802.11a radio (5.8-GHz sub-band).
Table 14
Table 14 WGB Interoperability Chart
RAP/MAP (5-GHz
Backhaul) WGB
3200
4.9-GHz
(5, 10, 20
MHz)
1524PS/1524PS X
1522/1522 X
1524PS/1522 —
1522/1524PS X
1240/1130 —
Note In the above table, X means Supported and — means Not Supported.
Configuration Guidelines
For the AP1522 or AP1524PS and Cisco 3200 to interoperate on the public safety network, the following
configuration guidelines must be met:
•
•
•
The default channel width for Cisco 3200s is 5 MHz. You must either change the channel width to 10 or
20-MHz to enable WGBs to associate with the AP1522 and AP1524PS or change the channel on the
AP1522 or AP1524PS to a channel in the 5-MHz (channels 1 to 10) or 10-MHz band (channels 11 to 19).
•
•
Cisco Aironet 1520, 1130, 1240 Series Wireless Mesh Access Points, Design and Deployment Guide, Release 6.0
OL-20213-01
identifies mesh access points and their respective frequency bands that support WGB.
5-GHz 2.4-GHz
— X
X X
X X
— X
X X
Client access must be enabled on the backhaul (Mesh global parameter). This feature is not
supported on the AP1524PS.
Public safety must be enabled globally on all mesh access points (MAPs) in the mesh network.
Channel number assignment on the AP1522 or AP1524PS must match those on the Cisco 3200 radio
interfaces.
Channels 20 (4950 GHz) through 26 (4980 GHz) and sub-band channels 1-19 (5 and 10 MHz)
–
are used for Cisco 3200 interoperability. This configuration change is made on the controller.
No changes are made to the mesh access point configuration.
Channel assignments are only made to the RAP. Updates to the MAP are propagated by the RAP.
–
Radio (802.11a) must be disabled when configuring channels and then re-enabled when using the
CLI.
When using the GUI, enabling and disabling of the 802.11a radio for channel configuration is
–
not required.
Cisco 3200s can scan channels within but not across the 5, 10 or 20-MHz bands.
Connecting the Cisco 1520 Series Mesh Access Point to Your Network
1240 1130
5-GHz 2.4-GHz 5-GHz
— X —
X X X
X X X
— X —
X X X
1310
2.4-GHz 2.4-GHz
X X
X X
X X
X X
X X
87