Cisco aironet 1522 Design And Deployment Manual page 76

Connecting the Cisco 1520 Series Mesh Access Point to Your Network
d.
To save your changes, enter this command:
Step 7
save config
Using the CLI to View Global Mesh Parameter Settings
Use these commands to obtain information on global mesh settings:
Use these commands to obtain information on global mesh settings:
•
•
•
Cisco Aironet 1520, 1130, 1240 Series Wireless Mesh Access Points, Design and Deployment Guide, Release 6.0
76
config mesh security force-ext-auth enable
To provide external authentication on a RADIUS server using a MAC username (such as
c1520-123456) on the RADIUS server, enter these commands:
config macfilter mac-delimiter colon
config mesh security rad-mac-filter enable
config mesh radius-server index enable
config mesh security force-ext-auth enable
show mesh client-access—Shows the status of the client-access backhaul as either enabled or
disabled. When this option is enabled, mesh access points are able to associate with 802.11a wireless
clients over the 802.11a backhaul. This client association is in addition to the existing
communication on the 802.11a backhaul between the root and mesh access points.
controller >show mesh client-access
Backhaul with client access status: enabled
show mesh ids-state—Shows the status of the IDS reports on the backhaul as either enabled or
disabled.
controller >show mesh ids-state
Outdoor Mesh IDS(Rogue/Signature Detect): .... Disabled
show mesh config–Displays global configuration settings.
(Cisco Controller) > show mesh config
Mesh Range....................................... 12000
Mesh Statistics update period.................... 3 minutes
Backhaul with client access status............... disabled
Background Scanning State........................ enabled
Backhaul Amsdu State............................. disabled
Mesh Security
Security Mode................................. EAP
External-Auth................................. disabled
Use MAC Filter in External AAA server......... disabled
Force External Authentication................. disabled
Mesh Alarm Criteria
Max Hop Count................................. 4
Recommended Max Children for MAP.............. 10
Recommended Max Children for RAP.............. 20
Low Link SNR.................................. 12
High Link SNR................................. 60
Max Association Number........................ 10
Association Interval.......................... 60 minutes
Parent Change Numbers......................... 3
Parent Change Interval........................ 60 minutes
OL-20213-01