Cisco aironet 1522 Design And Deployment Manual page 78

Connecting the Cisco 1520 Series Mesh Access Point to Your Network
Figure 45
Using the GUI to Enable Ethernet Bridging
To enable Ethernet Bridging on a RAP or MAP using the GUI, follow these steps:
Click Wireless > All APs.
Step 1
Click the AP name link of the mesh access point on which you want to enable Ethernet bridging.
Step 2
At the details window, select the Mesh tab. (See
Step 3
Figure 46
Select either RootAP or MeshAP from the AP Role drop-down menu, if not already selected.
Step 4
•
Cisco Aironet 1520, 1130, 1240 Series Wireless Mesh Access Points, Design and Deployment Guide, Release 6.0
78
Point-to-Multipoint Bridging
All APs > Details for (Mesh) Window
MeshAP—Select this option if the AP1520 has a wireless connection to the controller. This is the
default setting.
Figure 46.)
OL-20213-01