Using The Video Features; Configuring The Display Modes - Getac M230 Operation Manual

Using the Video Features

The video subsystem of your computer features:
14.1-inch TFT (Thin-Film Transistor) color LCD display with
1024 768 XGA (Extended Video Graphics Array) resolution, or
×
15-inch TFT color LCD display with 1400
Extended Video Graphics Array) resolution.
64 MB shared with system memory.
LCD backlight to help you see the display during poor lighting
conditions. Press Fn+F7 to turn it on/off (see Hot Keys in this
chapter).
Simultaneous display on LCD and external monitor, which is useful
when you have a presentation as you can control the screen from your
computer and face the audience at the same time.
Dual view capability, which allows you to expand your desktop on
the screen to another display device so that you have more desktop
space to work on.
Power Management.
Touchscreen function (option).
High contrast LCD display (option for 14.1-inch panel).
NOTE:
To take advantage of the enhanced video capabilities and before using the dual
view capability, the device driver supplied with your computer must be installed
(see chapter 6 for details).
The computer enters Standby or Hibernation mode when the LCD is closed. If you
want to use the computer with the LCD closed, set None to the "When I close the lid
of my portable computer" option in the Power Management Properties. Thus the
computer does not enter Standby or Hibernation mode when the LCD is closed.

Configuring the Display Modes

NOTE: When using CRT only, the resolution would depend on the supported resolution
by the CRT.
2-22
1050 SXGA+ (Super
×
Operating Your Computer