Touchscreen Driver - Getac M230 Operation Manual

Touchscreen Driver

To install the touch screen driver, perform the following:
1. Insert the driver disc into the optical drive.
2. Click on TouchScreen and follow the onscreen instructions to
continue.
3. When finished installing, select Yes to reboot your system. The driver
should now be loaded.
4. After the system has finished rebooting, click on the PenMount
Monitor icon
Control Panel.
5. Click on Standard Calibration.
6. Click on the four sides (points) and the plus-sign "+" on the screen to
calibrate your touchscreen for use on the computer.
6-8
located on the taskbar to bring up the PenMount
Installing Software Drivers