EMS Sky Connect Series Installation Manual page 42

4.4.1.8 DTMF Total Time - This is the time for a tone from the start of one digit to the
start of the next. The default value of 1016 works for most applications. To
determine the duration in seconds, multiply the value by 246 uSecs. For
example, the default value of 1016, times 246 uSecs, is 0.25 seconds. (only
appears when Dial/In-call mechanism enables DTMF)
4.4.1.9 DTMF Interval Time - This is the duration of the pause between digit tones.
The default value of 407 works for most applications. To determine the
duration in seconds, multiply the value by 246 uSecs. For example, the
default value of 407, times 246 uSecs, is 0.1 second. (only appears when
Dial/In-call mechanism enables DTMF)
4.4.1.10 DTMF Output Volume - The volume level of DTMF PWM digit tones, a value
from 0 to 127. Default value is 30.
4.4.1.11 Phones Volume - The volume level of the phones, a value from 0 to 127.
Default value is 50.
4.4.1.12 Sidetone Level - The sidetone level, a value from 0 to 127. Default value is 0.
4.4.1.13 Microphone Volume - The microphone volume, a value from 0 to 127. Default
value is 60.
4.4.1.14 Ringer Volume - The ringer volume, a value from 0 to 127. Default value is 50.
4 - 10
1616-964-12
Date: 7/27/2011
Rev. 2.1