Antenna Cable - EMS Sky Connect Series Installation Manual

3.6.2 ANTENNA CABLE

When routing antenna cable, avoid high current wiring, other transmitting antenna
cables, and sharp bends. Antenna cable should be selected to obtain 3dB max loss at
1.6GHz. The installer is responsible for providing antenna cables. Use the following
chart as an aid to determine the appropriate cable type for your required installed
length. Follow industry practices when assembling the TNC connectors. RG-142
coax cable is recommended in installations up to 20 feet in length, alternative cable
types are listed below.
Pre assembled cable lengths are available from EMTEQ, ECS, and PIC.
Cable Length
< 15 feet
15-25 feet
25-40 feet
35-60 feet
Table 5
EMTEQ
PFLX195-100
PFLX240-100
PFLX340-100
3 - 7
ECS
352001
311601
311201
310801
1616-964-12
Date: 7/27/2011
Rev. 2.1
PIC
S33141
S33141
S55122
S22089