Loading Of Message Sets - EMS Sky Connect Series Installation Manual

1616-964-12
Date: 7/27/2011
Rev. 2.1
4.5

Loading of Message Sets

Loading the Message Sets into the MMU II may be done in one of two ways.
A.) Serial port of a PC connected to the pigtail of the MMU II harness via a 9 pin
serial port cable.
B.) Wi-Fi port on the MMU II (if so equipped)
The MSet Mange software has provisions to select either of the above options.
The best way to load a MSet into the MMU II is through the connector P/J19 as
shown in the installation drawings. This is a pigtail that is to be provided to the
customer so the MSet can be loaded without removing the MMU II from the
aircraft. Please make sure this connector is provided in all the installations.
4 - 16