Safety Warnings - Vemer Dafne User Manual

Electronic chronothermostats series with flush-mounting in
3 modules box (503 type) suitable for the temperature control in household.
Two versions are available:
■ Dafne, with battery power supply and input for external contact with whom to
switch on/to switch off the chronothermostat remotely (by telephone)
■ Dafne 230, with mains power supply
These instruments perform actions of 1B type and are intended for operating in
environments Pollution degree 2 and Overvoltage Category III (EN 60730-1).
■ During installation and operation product it is necessary to observe the
following instructions:
1) The device must be installed by a qualified person, in strict compliance with
the connection diagrams.
2) Do not power or connect the device if any part of it is damaged
3) After installation, inaccessibility to the connection terminals without
appropriate tools must be guaranteed.
4) The device must be installed and activated in compliance with current electric
system standards
5) Before accessing the connection terminals, verify that the leads are not live.
6) In the electrical system of the building where the device must be installed, a
protection device from the overcurrents must be present (for Dafne 230 only).
Code Model
VN166500
Dafne
VE431300
Dafne 230

SAFETY WARNINGS

Description
Weekly battery chronothermostat
Weekly chronothermostat 230V
- 18 -
Dafne chronothermostat, user's manual