Safety Warnings - Vemer Chronos 230 Bianco User Manual

Electronic touch screen chronothermostats with wall-mounting suitable for the
temperature control in household. Two versions are available:
CHRONOS, battery powered, with backlit monocolor display (blue) and input
for external contact configurable for the connection of an external temperature
probe or of an auxiliary contact with whom to switch on/to switch off the
chronothermostat remotely (by telephone).
CHRONOS 230, mains powered, with backlit monocolor display, which changes
tone according to the gap between the environment temperature and the setpoint.
These devices perform actions of 1B type and are intended for operating in
environments Pollution degree 2 and Overvoltage Category III (EN 60730-1).
During product installation and operation it is necessary to observe the
following instructions:
1) The device must be installed by a qualified person, in strict compliance with
the connection diagrams.
2) Do not power or connect the device if any part of it is damaged.
3) After installation, inaccessibility to the connection terminals without
appropriate tools must be guaranteed.
4) The device must be installed and activated in compliance with current electric
system standards.
5) Before accessing the connection terminals, verify that the leads are not live.
6) In the electrical system of the building where the device must be installed,
a switch and a protection device from the overcurrents must be present (for
Chronos 230 models only).
Code Model
VE451100 Chronos Bianco
VE452900 Chronos Nero
VE453700 Chronos 230 Bianco
VE454500 Chronos 230 Nero

SAFETY WARNINGS

Description
Touchscreen chronothermostat batteries white
Touchscreen chronothermostat batteries black
Touchscreen chronothermostat 230 V white
Touchscreen chronothermostat 230 V black
- 5 -
CHRONOS Chronothermostat User Manual