Safety Warnings - Vemer KIROS User Manual

Flush-mounting chronothermostat powered by mains (230 V~), suitable for the control
of heating and air-conditioning systems.
The device, through the relay, acts on the control circuit of the burner or the circulation
pump (heating), or on the control circuit of the air conditioner (conditioning), in order to
guarantee the desired temperature.
The blue backlighting of the display can be switched off if the device is installed in
bedrooms, for example.
The device is supplied with white and anthracite frames and with adapters that allow it
to be installed with the plates of the main civil series.
Code Model
VE780000 Kiros
VE780001 Kiros-INT
■ During installation and operation of the product, it is necessary to comply
with the following instructions:
1) The device must be installed by a skilled person, in strict compliance
with the connection diagrams.
2) Do not power on or connect the device if any part of it is damaged.
3) After installation, inaccessibility to the connection terminals without
appropriate tools must be guaranteed.
4) The device must be installed and activated in compliance with current electric
systems standards.
5) Before accessing the connection terminals, verify that the leads are not live.
6) In the electrical system of the building where the chronothermostat
must be installed, a protection device from the overcurrents must be present.
7) The device performs actions of 1B type and is suitable for environments
with pollution degree 2 and overvoltage category III (EN 60730-1).
Description
Weekly chronothermostat with interchangeable front cover
Weekly chronothermostat with interchangeable front cover

SAFETY WARNINGS

- 2 -
KIROS Chronothermostat User Manual