Safety Warnings - Vemer Iride User Manual

Electronic touch screen chronothermostats series with flush-mounting on 3 modules
box (503 type) suitable for the temperature control in household.
Two versions are available:
■ Iride, battery powered, with backlit monocolour display (blue) and input for external
contact with whom to switch on/to switch off the chronothermostat remotely (by
telephone)
■ Iride 230, mains powered, with backlit monocolour display, which changes tone
according to the gap between the environment temperature and the setpoint
These devices perform actions of 1B type and are intended for operating in
environments Pollution degree 2 and Overvoltage Category III (EN 60730-1).
■ During product installation and operation it is necessary to observe the
following instructions:
1) The device must be installed by a qualified person, in strict compliance with
the connection diagrams.
2) Do not power or connect the device if any part of it is damaged.
3) After installation, inaccessibility to the connection terminals without
appropriate tools must be guaranteed.
4) The device must be installed and activated in compliance with current electric
system standards.
5) Before accessing the connection terminals, verify that the leads are not live.
6) In the electrical system of the building where the device must be installed
and a protection device from the overcurrents must be present (for Iride 230
models only).
Code Model
VE456000
Iride
VE457800
Iride 230

SAFETY WARNINGS

Description
Touch screen chronothermostat batteries
Touch screen chronothermostat 230V
- 18 -
Iride Chronothermostat User Manual