Safety Warnings - Vemer Thermo GSM Bianco VE715900 User Manual

■ Thermo GSM is a wall-mounting electronic thermostat with a built-in GSM interface,
available with weekly programming. The instrument performes 1B type actions and
it is suitable for installations in ambient with a pollution degree of 2 and overvoltage
category III (EN 60730-1).
The GSM interface permits the total control of the thermostat, also remotely, by sending
text message commands.
Thermo GSM also permits defining a night time slot to adjust the temperature according
to the reduced setpoint.
Code Model
VE716700
Thermo GSM Nero
VE715900
Thermo GSM Bianco
■ During installation and operation of the product, it is necessary to comply
with the following instructions:
1) The instrument must be installed and activated by qualified personnel,
following the connection diagrams provided in this manual scrupulously.
2) Do not power on or connect the instrument if any part of it is damaged.
3) After installation it is necessary to guarantee the impossibility of accessing
the terminals without specific tools.
4) The instrument must be installed and activated in compliance with current
electric systems standards.
5) Before accessing the connection terminals, verify that the leads are not live.
6) The use of a GSM device can cause interference with the functioning of
electronic devices non-screened from radiofrequency signals (electromedical
devices, pacemakers, hearing aids etc.).
7) In the power supply network a bipolar disconnection must be present.
8) A protection device against over-currents should be installed in the electrical
system, upstream of the device.
Description
Wall-mounting GSM thermostat 230 Vac
Wall-mounting GSM thermostat 230 Vac

SAFETY WARNINGS

- 5 -
Thermo GSM Digital Thermostat User Manual