Programming Menu - Vemer Dafne User Manual

With this menu it's possible to modify
the following operating parameters:
- Date and time
- Automatic operation programs
- Automatic operation temperatures
- Timings
- Advanced functions.
Time and date modification
To modify the set time and date:
1. From normal operating display, press for a long time the key
starts flashing on field (2)
2. Press the key
flashing. Parameters sequence to set is:
seconds* -> minutes -> hours -> year -> month -> day
3. Use the keys
to the next parameter.
(*) for seconds it's possible only the synchronisation at value 00
4. Once all parameters are set, to exit and go back to the programming menu, press
for a short time the key
To exit and go back to the normal operation (automatic, manual) press for a long
time the key or wait for the time-out expiration (30 seconds about).
Inside this menu it's also possible to modify the parameters for winter/
summer time change. The procedure is described in a detailed way in the
chapter "Summer time change" on page 36.

PROGRAMMING MENU

to access parameters modification. The seconds field starts
and to modify the values and the key
.
Dafne chronothermostat, user's manual
- 24 -
3s
until the symbol
to confirm and move