Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Vemer Tuo Wi-Fi RF
Summary of Contents for Vemer Tuo Wi-Fi RF
- Page 1 Digital Chronothermostat TUO Wi-Fi RF User Manual...
- Page 2 How to do in case of replacement of the Access Point Pagina 73 How to remove the device from your account Pagina 73 Technical characteristics Pagina 74 Reference standards Pagina 74 Winter programs Pagina 75 Summer programs Pagina 76 - 39 - Manuale d’Uso Cronotermostato TUO Wi-Fi RF...
- Page 3 The heating (or air conditioning) system is controlled by sending a radiofrequency signal to a remote actuator of Vemer range or via the bistable relay with which the device is equipped (wired solution).
-
Page 4: Safety Warnings
7) The device performs actions of 1B type and is suitable for environments with pollution degree 2 and overvoltage category III (EN 60730-1). DIMENSIONS - 41 - TUO Wi-Fi RF Chronothermostat User Manual... -
Page 5: Device Description
CLOCK date and time Local active operation. In this state the device is disconnected from the Cloud Vemer and any change in operation must be made using the keys on the chronothermostat. Local operation can be disabled by the app... -
Page 6: Connection Diagram
CONNECTION DIAGRAM Connection diagram for the supply Connection diagram for the control of circulation pumps, solenoid valves, of the boiler, heat pumps, etc. etc. at 230V ~ - 43 - TUO Wi-Fi RF Chronothermostat User Manual... -
Page 7: Installation And Initial Configuration
Avoid installation near doors or windows, in niches, behind doors and curtains or in positions with excess or total lack of ventilation, to avoid that the reading of the temperature measured by the probe is in some way offset. click - 44 - TUO Wi-Fi RF Chronothermostat User Manual... - Page 8 Enter the password of the home Wi-Fi network. e. Enter a name that identifies Tuo Wi-Fi RF, the pin (4 digits shown on the display of Tuo Wi-Fi RF) and choose an icon that helps identify the device among those proposed.
-
Page 9: App Description
APP DESCRIPTION Thanks to the app you can control your Tuo Wi-Fi RF device remotely, easily and intuitively. Page “Login” Access using the access credentials (email, password) chosen during registration phase of your account Page “Devices list” From this screen it’s possible to choose which device to control. - Page 10 Main Page This screen shows the status of " Tuo Wi-Fi RF": Measured temperature (25.5°C) Operating mode (HEATING) System status: ( ) red = on ( ) gray= off Set temperature and running program name. Touch this area to change the running program.
- Page 11 Created a program for a day, it's possible to copy it to any other day of the week (“Copy” function). Note: the image refers to the version of the app for smartphone. On the tablet the whole weekly programming is visible on a single screen. - 48 - TUO Wi-Fi RF Chronothermostat User Manual...
- Page 12 "Tuo Wi-Fi RF" settings From this screen it’s possible: The name of "Tuo Wi-Fi RF" The icon that identifi es it The temperature values T1, T2 and T3 The advanced settings: •...
- Page 13 • choose the type of temperature regulation (on/off or proportional) • block local operation. When local operation is locked, any setting made with Tuo Wi-Fi RF keypad will be ignored. This function is useful if you want to have control of the device only using the app and prevent changes in settings from the keypad of Tuo Wi-Fi RF.
-
Page 14: Operating Mode
In this mode the device does not perform any regulation however, if it works in heating mode, it maintains a minimum temperature (antifreeze temperature) to prevent possible freezing of the system. - 51 - TUO Wi-Fi RF Chronothermostat User Manual... - Page 15 Local operation is reported both on the device by turning on the icon and on the app. Local operation can be interrupted at any time only by the app. - 52 - TUO Wi-Fi RF Chronothermostat User Manual...
-
Page 16: Configuration Menu Description
The ADV menu allows you to configure the general operating parameters of the device. The RF menu allows configuration and the radiofrequency connection test between the device and the remote actuator. - 53 - TUO Wi-Fi RF Chronothermostat User Manual... - Page 17 • to change the settings of the summer/winter time change, press and hold for a long time the key (see "Configuration of the summer/winter time change") - 54 - TUO Wi-Fi RF Chronothermostat User Manual...
- Page 18 For example, in Italy the summer time starts the last (LST) Sunday (7) of March (03) at 2:00 o' clock and the last (LST) Sunday (7) of October (10) at 3:00 o' clock. - 55 - TUO Wi-Fi RF Chronothermostat User Manual...
- Page 19 If no program meets the needs: • choose the one that is closest to you and press the key to customize the profile (see "How to customize the profile of a Px program") - 56 - TUO Wi-Fi RF Chronothermostat User Manual...
- Page 20 T2 from 12 to 13.30 and T3 from 13.30 to 14.00 It is possible to set delays of 15, 30, 45 minutes, independent for every hour of the day. - 57 - TUO Wi-Fi RF Chronothermostat User Manual...
- Page 21 (maximum value) are allowed. These factory values are: = 2°C, = 50°C but can be modified through the ADV menu. Note: the condition T1 ≤ T2 ≤ T3 must be respected. - 58 - TUO Wi-Fi RF Chronothermostat User Manual...
- Page 22 Note: to cancel a timing in progress or to exit without activating the timer, set 00'. Note: the timing ends in the case of changes to the operating mode. - 59 - TUO Wi-Fi RF Chronothermostat User Manual...
- Page 23 Operating mode Setting up: • if the device is connected to a heating system (winter operation) • if the device is connected to an air conditioning system (summer operation) Factory value: (heating). - 60 - TUO Wi-Fi RF Chronothermostat User Manual...
- Page 24 Allowed values: 0.5°C ÷ 5°C (band), 10, 20 or 30 minutes (period). Factory value: 0.5 °C (band), 10 minutes (period). For more information on the parameters of the regulation logics, see "Regulation type" on page 71. - 61 - TUO Wi-Fi RF Chronothermostat User Manual...
- Page 25 In this case, introduce an adjustment temperature with the menu. Allowed values: -5°C ÷ 5°C . Factory value: 0 °C. Note: the temperature value shown on the display during normal operation is inclusive of any adjustment introduced. - 62 - TUO Wi-Fi RF Chronothermostat User Manual...
- Page 26 - the status of the Wi-Fi connection: on fixed: device connected to the home network flashing: search for Wi-Fi network in progress - the association between the device and Vemer account: on fixed: associated with a Vemer account flashing: not associated with any Vemer account Note: during the first 20 seconds or so of this screen viewing...
- Page 27 Note: the configuration and the test of the radiofrequency connection are carried out accessing the RF menu (see page 67). This menu is active only if the system control is set to , while it is not active if it is set to - 64 - TUO Wi-Fi RF Chronothermostat User Manual...
- Page 28 When the keypad lock is active, the symbol appears on the display and, after pressing a key, the word appears. To find out how to unlock the keypad, see page 69. - 65 - TUO Wi-Fi RF Chronothermostat User Manual...
- Page 29 - red when the measured temperature is higher than the set temperature of at least 0.5 ° C colour 1 ..colour 48 The backlighting can also be activated/deactivated from the initial screen by keeping the key pressed for a long time. - 66 - TUO Wi-Fi RF Chronothermostat User Manual...
- Page 30 The RF menu is active only if the system command mode (ADV menu OUT ) is set to RF. x5 times Initial screen Configuration menu RF menu Enable configuration or test - 67 - TUO Wi-Fi RF Chronothermostat User Manual...
- Page 31 30 seconds, the time within which the device TUO Wi-Fi RF must send the pairing code 2. go to the configuration page of TUO Wi-Fi RF device 3. press the key for at least 3 seconds until the symbol lights up: the pairing code has been sent and the devices are paired.
- Page 32 The keypad remains unlocked for about 45 seconds from the last press of a key, after which the keypad reactivates the lock. To remove the key lock, see p. 65. - 69 - TUO Wi-Fi RF Chronothermostat User Manual...
-
Page 33: Device Reset
0.5 °C active Automatic summer time change (according to EU rules) Period (proportional) 10 minutes Backlighting active Adjustment command rF (via RF signal) Key lock password active Antifreeze temperature OFF 6 °C - 70 - TUO Wi-Fi RF Chronothermostat User Manual... -
Page 34: Regulation Type
• 30 minutes for high thermal inertia systems (cast iron radiators) How to choose the band: • narrow band (0.5 °C) for systems with low thermal inertia • narrow band (5 °C) for systems with high thermal inertia - 71 - TUO Wi-Fi RF Chronothermostat User Manual... - Page 35 Selecting one of the other regulation types, the valve will not work proportionally, but it will be completely open or completely closed according to the difference between the set temperature and the detected temperature. - 72 - TUO Wi-Fi RF Chronothermostat User Manual...
- Page 36 Enter the name, device pin (see page 59 for the pin of your device) and an icon to help identify the device. Choose "Save" - If you do not have a personal Vemer account yet: d. Follow the "Device configuration" procedure on p. 45...
-
Page 37: Technical Characteristics
ETSI EN 300 328, ETSI EN 300 220-1, ETSI EN 300 220-2 , ETSI EN 301 489-1, ESTI EN 301 489-17, ETSI EN 301 489-3 The full text of the EU Conformity Declaration is available at www.vemer.it address. - 74 -... -
Page 38: Winter Programs
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 - 75 - TUO Wi-Fi RF Chronothermostat User Manual... -
Page 39: Summer Programs
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 - 76 - TUO Wi-Fi RF Chronothermostat User Manual... - Page 40 Vemer S.p.A. I - 32032 Feltre (BL) Via Camp Lonc, 16 Tel +39 0439 80638 Fax +39 0439 80619 e-mail: info@vemer.it - web site: www.vemer.it 05-2019...