Programing - Panasonic VL-V900 Installation Manual

Setup Tool
5

5-2. Programing

5.1.1. Programming overview
There are two methods for configuring the system.
– Using a computer to configure the system. This is called "PC programming".
– Using individual station devices (lobby stations, main monitors, and SLTs of a connected PBX) to configure the system.
This is called "lobby station
You can combine these methods to suit your needs. For example, you can configure the system for the first time using a PC,
and then make small changes to the system later using a station device.
5.1.2. PC programming
PC programming allows you to use a computer and the Panasonic Large Apartment System Setup Tool to create and
edit system data while offline, and then upload the data to the system while on-site.
* The Panasonic Large Apartment System Setup Tool is also called "setup tool" in this document.
System requirements
– Operating system: Microsoft® Windows® 7, Microsoft Windows 8
– Additional framework: .Net Framework 4.0 or later
5.1.3. Installing the setup tool and USB driver
1 Download the installer.
Download information is available at the following web site.
http://panasonic.net/pcc/support/intercom/v900
2 Double-click the installer " Setup.exe.
3 Follow the on-screen instructions and install the tool and the USB driver.
5.1.4. Connecting the computer to the control box
1. Connect a USB cable to your computer's USB port.
2. Lift up the dust cover that protects the control box's USB port.
3. Make sure no debris has fallen into the USB port.
4. Connect the USB cable to the control box's USB port.
programming" (page xx), "main monitor programming" (page xx), and "SLT programming" (page xx).
* When disconnecting the
USB cable from the control
box, make sure the dust
cover completely covers the
USB port to prevent any
debris from falling into it.
55