Control Box - General Settings - Panasonic VL-V900 Installation Manual

Setup Tool
5
5-5. Control Box – General settings
Parameter
Monitor Time Out Determines the amount of time that passes when watching
camera images before the standby screen is displayed.
[0]: 180 SEC, [1]:90 SEC, [2]:60 SEC, [3] :30 SEC
Talk Time Out Determines the amount of time that passes when talking before
the standby screen is displayed.
[0]:90 SEC, [1]:60 SEC, [2]:30 SEC, [3]:180 SEC, [4]:300 SEC
Camera Signal Tells the system what signal format is used by the external
camera.
Lift Signal Mode Determines the signalling method used by the lift controller to
communicate with the lift. Select the signal type according to the
specifications of the lift.
After a visitor is admitted, this setting determines the amount of
Lift Signal Time
time that the visitor can use the lift to visit the corresponding
floor.
If the lift has a similar setting, set this parameter to any value
other than "0"; the lift setting will take priority.
(1–900 s, or 0 to disable)
Determines if visitors can call rooms directly (room mode), or if
Visitor Call Mode
their calls are directed to a reception terminal (reception mode).
[0]:ROOM MODE, [1]:RECEPTION MODE
Tells the system the extension number for terminal 1– 4.
Terminal 1–4 Extension
Number (24 digits max.)
Terminal 1–4 Name Determines the name for terminal 1–4.
Code [1]:TERMINAL #, [2]:RECEPTION, [3]:GATE, [4]:CONTROL ROOM,
[5]:RESTAURANT, [6]:HALL, [7]:POOL, [8]:SECURITY OFFICE,
[9]:ENTRANCE, [10]:GYM, [11]:GUEST ROOM, [12]:KID'S ROOM,
[13]:PARKING, [14]:TERRACE, [15]:LIFT LOBBY
Terminal 1–4 Reception Determines whether terminal 1–4 is a reception terminal or a
Mode normal terminal (i.e., cannot be used as a reception terminal).
[0]:NORMAL TERMINAL, [1]:RECEPTION TERMINAL
Emergency Terminal Tells the system the extension number for the emergency
Extension Number terminal. (24 digits max.)
Emergency Terminal Determines whether the emergency terminal can talk
Emergency Mode to residents during an emergency call (emergency talk
mode) or if the emergency terminal receives an
announcement only (emergency notice mode).
[0]:EMERGENCY TALK, [1] EMERGENCY NOTICE:
Description
[0]:PAL, [1]:NTSC
[0]:Relay, [1]:binary
Default
0
(180 SEC)
0
(90 SEC)
0
(PAL)
0
(RELAY)
300
(300 SEC)
0
(ROOM MODE)
-
1
(TERMINAL #1)
0
(NOMAL
TERMINAL)
-
0
(EMERGENCY
14
TALK)