Panasonic VL-V900 Installation Manual page 58

Setup Tool
5
5-1. Update the software version using a SD-Card （VL-V700）
(1) Back up the setting data.
After Updating, the setting data will be delated.
So before updating, you should download
and backup the existing setting data via PC-tool .
(2) Get the new bzb files from the server*.
Save those files in the root folder on the SD Card.
(3) Insert the SD Card into the SD slot of VL-V700
(4) Push down and hold the Function switch,
then turn on the power switch.
Function
Switch
Reset
Switch
700_uniA.bzb
700_uniB.bzb
700_uniD.bzb
700_bbic.bzb
Power
Switch
Server* http://panasonic.net/pcc/support/intercom/v900
(5) Keep pressing the Function switch
until the LEDs are flashing quickly.
Power
LED
Access
LED
(6) When Power LED has turned off and the Access LED is lit,
the update is finished. Turn off the power switch.
Power
LED
Access
LED
(7) Initialization
Push down the Reset switch and turn on the power switch.
Keep pressing the switch until the Power LED is flashing.
AC
Push the Function switch
until the Power LED is off and Access LED is lit.
Function
Switch
Reset
Switch
After that release the switch.
(It takes about 40sec until
they start flashing.)
(It takes about 20min in total.)
Power
Switch Power
LED
Access
LED
54